Medical ultrasonic cleaning machines have been widely used in hospitals. Many medical instruments and tools need to be reused because of their materials and cost, however, due to the special health conditions of hospitals, these medical devices need medical ultrasonic cleaning machine to clean. And medical ultrasonic cleaning machine in the use of the process sometimes there will be problems, the following to understand what are the specific common problems?

                                                                                     

The problem of vibration surface perforation
In the medical ultrasonic cleaning machine, the vibrating surface is connected with the transducer to produce a large area of ultrasonic wave. When the cleaning machine is used for a long time, it is easy to overload and damage the vibrating surface, after a certain service life, there will be washing machine vibration surface perforation, and stainless steel vibration surface perforation is unable to reverse repair, generally only to replace the entire machine.
Second, the ultrasonic oscillator dampness problem
A cleaning solution is required when using a medical ultrasonic cleaning machine. If the solution is not cleaned promptly after cleaning, it is easy for the vibrator of the ultrasonic wave to become wet. In addition, if the environment around the place where the ultrasonic cleaning machine is placed is wet, it will also cause this situation. After the vibrator is wet, it will affect the current and resistance value, and the effect of cleaning medical devices will be greatly reduced, the vibrator can be taken out for artificial drying treatment, but pay attention to take out the spray-plastic shell.
Ultrasonic vibration degumming
The vibrator of a good quality medical ultrasonic cleaning machine is fixed with screws and glue, so it may not be abnormal in the current when it is degummed, but if there is a problem with the fixing, the vibrator will collide with the vibrating surface, this is also a cause of vibration surface damage, then it is necessary to pay attention to touch the vibrator to see if it is stable, if the feeling of loose it will do a good repair.