Introduction of ultrasonic vibrating plate

1. Ultrasonic shock plate, by shock plate and ultrasonic generator of 2 parts, when the standard model of ultrasonic cleaning machine is not suitable for special working environment, in addition to customized special specifications. It can also adopt the input type vibrating plate equipment and transform it into an ultrasonic cleaning machine, thus saving the cost of the equipment and realizing the actual cleaning effect.

2. All stainless steel vibrating plate 304,/316 structure, alkali resistance, acid resistance, vibrating plate coated with hard chromium. The Ultrasonic transducer uses high-quality high-performance products with high electro-acoustic conversion efficiency.

3. It adopts split structure, high frequency cable with socket is used to connect between seismic plate and ultrasonic generator, so it is convenient to use and maintain.

Four. The installation arrangement is flexible. The ultrasonic radiation surface can be arranged on the bottom, side or top of the cleaning groove according to the actual situation.

5. Ultrasonic vibrating plate can be made according to customer's requirements. It is mainly used for cleaning electroplated parts, clock parts, hardware parts, electronic equipment, polyester filter, semiconductor silicon chip, tools, lenses, etc. 

Glasses frame, jewelry, jewelry, glass, utensils and other industries, more widely used.

Principle of ultrasonic vibrating plate

The application principle of ultrasonic vibrating plate is that the high-frequency oscillating signal from ultrasonic generator is transformed into high-frequency mechanical oscillating signal by transducer and propagates to medium

When the sound pressure reaches a certain value, the fine bubbles (cavitation nuclei) in the liquid will vibrate under the influence of the sound field

When the bubble grows rapidly and closes suddenly, a shock wave creates thousands of atmospheric pressures around it, destroying the insoluble dirt and dispersing it in the cleaning solution, when the particles are coated by the oil and adhere to the surface of the cleaning, the oil is emulsified, the solid particles are separated, thus realizing the cleaning effect of the surface of the cleaning piece.

Frequently Asked Questions

1: it is best in the cleaning tank at the end of the liquid washing machine vibrating plate can be turned on;

2: the ultrasonic generator should be as far away from the heat source as possible, to maintain good ventilation and heat dissipation;

3: Ultrasonic power supply to resolutely avoid the flow of liquid, so as to avoid short-circuit failure or corrosion;

4: Ultrasonic shock plate completely free of charge one-time over eight hours, if there is a continuous operation, proposed to work for more than four hours, a slight break to continue to work.

5: regular cleaning tank body to achieve surface cleaning;

6: The Machine does not work for a long time, must idle, usually 15 days or more than a month to work back;

7: seismic plate if there is a penetration condition, must be regularly replaced steel plate;